Recent Blogs Posts

  1. 2020 300 TPI best mod ever

    Quote Originally Posted by Foochung View Post
    Jason

    Give him a call.

    The bike runs better than it ever has. With no reflash. I was anxious like you about the bike running lean. My bike runs excellent. No pipe bang,no hanger idle on decell, nothing.
    Ever bike has its own basic personality. Not every single tpi is going to run exactly the same. If your tpi ran rich itís still gonna run rich. If it ran a little lean then it still will.
    For my bike I see no reason to get a reflash.
    ...
    Categories
    Uncategorized
  2. 2020 300 TPI best mod ever

    Quote Originally Posted by Foochung View Post
    Jason

    Give him a call.

    The bike runs better than it ever has. With no reflash. I was anxious like you about the bike running lean. My bike runs excellent. No pipe bang,no hanger idle on decell, nothing.
    Every bike has its own basic personality. Not every single tpi is going to run exactly the same. If your tpi ran rich itís still gonna run rich. If it ran a little lean then it still will.
    For my bike I see no reason to get a reflash.
    ...
    Categories
    Uncategorized
  3. 2020 300 TPI best mod ever

    Quote Originally Posted by Foochung View Post
    Jason

    Give him a call.

    The bike runs better than it ever has. With no reflash. I was anxious like you about the bike running lean. My bike runs excellent. No pipe bang,no hanger idle on decell, nothing.
    Every bike has its own basic personality. Not every single tpi is going to run exactly the same. If your tpi ran rich itís still gonna run rich. If it ran a little lean then it still will.
    For my bike I see no reason to get a reflash.
    ...
    Categories
    Uncategorized
  4. 2004 200sx Bogg

    Quote Originally Posted by Shuey70 View Post
    Quote Originally Posted by jerseydevil View Post
    Engine side i.d. of 38.7 mm is a true 39 mm. I just measured a 38 at 37.95 mm and a 36 at 35.99 mm. Seriously, and this applies to the others as well. The JD needles REQUIRE at least 2 steps richer mj than a thin tip needle such as NOZF and the R1469 at least 1 if not 2 steps also. Using a 175 mj is for the 36 mm carb. For a 38 mm go up on the mj at least 2 - 3 sizes and for a 39mm at least 4 from a 36 mm. It's a good thing you guys don't ride hard or LONG on the mj and that's why you're getting
    ...
    Categories
    Uncategorized
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	715543D6-0BA9-4E53-A309-228FB2D58415.jpg 
Views:	3 
Size:	48.0 KB 
ID:	41042  
  5. 2004 200sx Bogg

    Quote Originally Posted by Shuey70 View Post
    Quote Originally Posted by jerseydevil View Post
    Engine side i.d. of 38.7 mm is a true 39 mm. I just measured a 38 at 37.95 mm and a 36 at 35.99 mm. Seriously, and this applies to the others as well. The JD needles REQUIRE at least 2 steps richer mj than a thin tip needle such as NOZF and the R1469 at least 1 if not 2 steps also. Using a 175 mj is for the 36 mm carb. For a 38 mm go up on the mj at least 2 - 3 sizes and for a 39mm at least 4 from a 36 mm. It's a good thing you guys don't ride hard or LONG on the mj and that's why you're getting
    ...
    Categories
    Uncategorized
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	72E19D13-ADDA-4B89-A473-1C904A5E3A85.jpg 
Views:	3 
Size:	48.0 KB 
ID:	41041  
Page 1 of 17 1234511 ... LastLast